Udemy - Electronic Circuits - Part4 - Field Effect Transistors [TorrentX]

Electronic Circuits - Part4: Field Effect Transistors https://WebToolTip.com Published 8/2026 Created by Ali Mavahebi Tabatabai MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch Level: Intermediate | Genre: eLearning | Language: English + subtitle | Duration: 65 Lectures ( 6h 23m ) | Size: 3.6 GB Master JFET, MOSFET and MESFET Circuit Analysis, Design, Multisim Simulations and Practical Experiments What you'll learn ⚡ Understand the physical structure, operation, and characteristics of Field Effect Transistors (FETs). ⚡ Analyze enhancement-type and depletion-type MOSFETs in different operating regions. ⚡ Understand MOSFET I-V characteristics and use them to analyze and design transistor circuits. ⚡ Understand PMOS transistors, threshold voltage, and the body effect. ⚡ Analyze Junction Field Effect Transistors (JFETs) and Metal-Semiconductor Field Effect Transistors (MESFETs). ⚡ Understand MOSFET handling, breakdown mechanisms, and important practical considerations when working with FETs. ⚡ Develop and use large-signal and small-signal models for FET circuit analysis. ⚡ Analyze and design FET biasing circuits for reliable operation. ⚡ Perform DC and AC analysis of MOSFET amplifier circuits. ⚡ Analyze, design, and understand Common Source (CS), Common Drain (CD), and Common Gate (CG) amplifiers. ⚡ Design FET amplifiers for desired voltage gain, input/output resistance, and maximum symmetrical output swing. ⚡ Understand source degeneration and its effect on amplifier performance. ⚡ Analyze and design cascade and cascode amplifiers. ⚡ Understand the operation of basic MOSFET current sources and current mirrors. ⚡ Analyze and design two-transistor, cascode, Widlar, and Wilson current mirrors. ⚡ Read and interpret MOSFET datasheets and identify transistor pins correctly. ⚡ Build and test practical MOSFET circuits, including reverse-voltage protection and temperature-control circuits. ⚡ Measure important amplifier parameters such as voltage gain, input resistance, and output resistance. ⚡ Use Multisim to simulate and analyze practical FET circuits. ⚡ Apply theoretical circuit analysis to practical electronic circuits through simulations and hands-on experiments. Requirements ❗ You should have a basic understanding of electrical and electronic circuits, including resistors, capacitors, inductors, and diodes. ❗ You should be familiar with basic circuit-analysis techniques such as Ohm's law, Kirchhoff's voltage and current laws (KVL and KCL), Thevenin's theorem, nodal analysis, and mesh analysis. ❗ A basic understanding of DC and AC circuit analysis is recommended. ❗ Basic knowledge of calculus and linear algebra will be helpful for understanding some of the mathematical analysis. ❗ No previous experience with FETs or MOSFETs is required. The course starts with the fundamentals and progressively moves toward advanced analysis and design. ❗ Multisim is recommended for following the simulation sect